Everyone knows that sewer drain blockage is a critical problem and considered a plumbing emergency. It is the condition in which the water does not get any place to freely go. Due to this, the water will come back into your plumbing system. If you notice this kind of problem, do not use the household plumbing until the blockage is cleared. If you want to get rid of the blocked sewer drain, you can learn about the basics of a sewer drain.
Essential Details of Sewer Drain:
The sewer drains are either 3 inches or 4 inches in diameter. It is usually fitted in the yard. This pipe is also connected to your main drain located inside your house. Every plumbing fixture such as sinks, toilets, showers, and tubs, etc., has its individual drain, which leads to the main drain. When the main sewer drain is blocked, you will have issues with wastewater. It makes blocked sewer drain very dangerous.
Address The Blockage
At first, you can lift your manhole covers. When it comes to an effective garden spade, it will easily raise an edge sufficient for grasping the cover. After that, you can inspect your chamber that is close to your main drain, gully or septic tank.
If the chamber is empty, chances are that the blockage is present in a drain between the chamber and gully. Otherwise, you can inspect your chamber close to the septic tank or main drain. If your chamber is truly full, then the blockage is present between it as well as the main drain. When the sewer drain actually leads to septic tank as well as the last chamber is filled, have a tank cleared.
Block Clearance
If you want to clear the blocked sewer drain, you can insert a big rod properly fitting with a plunger into your chamber. You can do it at a single end of your blocked section. If you have an empty chamber, then you can see the location of the pipe’s mouth. When you work properly from your filled chamber, you need to probe with your plunger. You can continue the process until you find the mouth of a pipe.
Using Extra Rods
You can add some extra rods when necessary. It helps to your plunger to reach the blockage in a pipe. You can turn your rods clockwise direction while clearing it. If you turn it in counter-clockwise direction, it will unscrew as well as be left in your drain for causing additional problems. You can keep pushing it against a barrier. After that, you can withdraw your plunger properly. In any instance, if it fails to shift the blocked sewer drain, you can withdraw your rods and add the corkscrew attachments to your plunger. It is one of the best and simple ways to break the packed obstructions.
Use Water
You can finish the clearance process by simply directing a power water jet down your drain by using a hosepipe. You can also do this process by simply filling the sink as well as releasing the water content in a single gush. It is highly helpful when cleaning the blocked sewer drain. Along with this, it also helps you to avoid any further drain blockage issues.
Clearing Up Properly
You can hose down properly the rods and drench it with much-diluted disinfectant liquid poured from your watering pipe. It plays a major role in cleaning the blocked sewer drain. The main aim of this cleaning process is to prevent any potential health hassles.